WMP系列橡膠.塑料機械配套 水循環模溫機
WMP SERIES RUBBER, PLASTIC WATER CIRCULATION TEMP. CONTROLLER
型 號 ： WMP系列
Model: WMP series
類 型 ： 橡膠(塑料)機械溫度控制
Type: Temp. controller for rubber and plastic machine
>>應用范圍
冷喂料橡膠擠出機、銷釘式冷喂料橡膠擠出機、雙復合橡膠擠出機組、復合胎面擠出機組、輪胎部件生產線、電纜設備生產線、塑料管材/型材擠出設備、螺桿式塑料擠出機、擠出機噴淋冷卻槽控溫、輥輪(筒)控溫及其它需精確控溫之場合
Applicatioin range: precise temperature control for cold feed rubber extruder,pin cold feed rubber extruder, double composite rubber extruder unit, duplex tread extruding machine set, production line for tyre parts, production line for cables, extrusion machinery for plastic pipes/extruded materials, plastic screw extruder, extruder spray-cooling bath, roller(roll barrel), etc.
>>機型特點
● 最高使用溫度120℃（另有140℃機型）Maximum function temperature: 120oC (Model with a temperature of 140oC is acceptable)
● 自動冷卻關機功能Automatic cooling shutdown function (WMP Series)
● 微電腦觸摸式面板，操作簡單 Easy operation with micro computer touch-type panel
● 開機自動排氣功能.Automatic exhaust function as starting up the machine
● 采用格蘭富（GRUNDFOS）立式多級離心泵浦Use GRUNDFOS brand of multiple centrifugal pump with vertical axis
● 出水、回水溫度顯示Temperature indication of output and input water
● OMRON、FUJI控制零件 Controlling parts of OMRON and FUJI brands
● 管路防爆裝置（安全閥）Explosion-proof apparatus
● 冷卻能力超強，可選用間接冷卻或直接冷卻
Powerful cooling functions with two options (indirect cooling or direct cooling)
● 故障顯示，維修不用專業人員Fault indication which allows maintenance without professional maintainer
>>安全保護系統 Safety system
● 總電源過電流無熔絲斷路器 Circuit breaker
● 異常警告指示燈系統 Alarm system
● 馬達反轉保護及指示燈 motor rollback protective lamp
● 異常警告蜂鳴器 Alarm sounding
● 缺水保護及指示燈Water lack protective lamp
● 保溫隔熱處理 Insulation heating system
● 過熱保護及指示燈 over-heat protective
● 回油溫度顯示表Oil reture display
● 循環泵浦過載保護及指示燈Circuiting pump overload protective lamp
● 電源欠相保護 Power protection
● By-Pass油壓回路 By-pass hydrauic circuit
>>通信功能(選購) Communication functions (optional)
● RS-485、RS-232C通信 Communication of RS-485 and RS-232c
● 遠程開/關機控制（安全模擬信號）.Remote boot-strap and shut-down control (safe analog signals)
● 連接PLC擴展模塊控制 Connect with PLC scalable module control
● 模溫機組聯動控制（安全模擬信號）.Linkage control of the mold temperature controller set (safe analog signals)
● Devicenet 通信總線 Communication trunk of Device net
集成故障警報輸出（安全模擬信號）Alarm output for an integrated failure (safe analog signals)
● 外接溫度傳感器（PT100.K型、J型） Temperature sensor of external connection (Model of PT100.K and J)
● 總電源電纜配置CEE插座及插頭General feed cable equipped with CEE sockets and plugs
>>產品參數
全系列模溫機采用GRUNDFOS（格蘭富）CR系列120℃熱水泵浦。
可根據客戶要求,設計制造您所需求的模溫機（溫控機）系統!
Special design upon request.
